|
|
Post by -=KK=- on Dec 9, 2007 19:02:55 GMT 8
i got a liitle troubled over one of my guns which have a noisy gears.. i tried to put plenty of grease but still same thing happened. Nakaplastic bushing pa po cya pero maingay pa rin..
ngano kaha ni? what do you think? ;D ;D
|
|
|
|
Post by whiterook on Dec 22, 2007 1:18:35 GMT 8
sir ano gears ba gamit mo, brand? ratio? most of the time its the motor height if not the shimming but some say its the grease you use, but i think plastic bushings wont help in reducing noise but instead subject your gears to faster wear and tear thus making it noisy
|
|
|
|
Post by -=KK=- on Dec 22, 2007 15:58:04 GMT 8
CA STU yung gears sir, I installed a Guarder metal bushing but i found out that its too thick for the cyma gearbox. Lalong umingay kasi medjo masikip. So I put back the plastic bushings, need to shave the gearbox pa yata sir eh..
|
|
|
|
Post by whiterook on Dec 23, 2007 2:12:15 GMT 8
try mo change bushings to a1000 if not yun king arms, teka may tool ka ba para force fit yun bushings, yun src bushing set may kasama na tool para force fit ang bushing sa gear box, but i thnk you dont have to shave the gearbox , and you have to be sure na 6mm ang gbox mo baka 7mm bushing mo at 6mm gbox mo, ang ca gears may ingay yon, pero in due time mag lessen din naman
|
|
|
|
Post by -=KK=- on Dec 23, 2007 10:06:42 GMT 8
oooops! i mean shave the bushing pala..  anyway, salamat sir. kahit maingay, ganda naman iratrat... lol |
|
|
|
Post by xdm349 on Jan 18, 2008 14:32:22 GMT 8
tama si whiterook comrade...its a combi of your shimmings and your motor height. The contact point of the surface of the teeth of the gears and the pinion sometimes are not aligned thus creating a noise. try adjusting your motor height first w/o a load then with a lighter spring until makuha mu young desired sound. bro i hope this would help.  |
|
|
|
Post by -=KK=- on Jan 18, 2008 14:58:20 GMT 8
yun ang di ko natry, adjusting the motor height... baket nga pala di ko naiisip yun na lagi ko naman ginagawa yan.. tsk!tsk! actually, napudpod na yung teeth ng pinion gear sa VAlencia eh, so it's kinda late.. hehehe better luck next time na lang..tanx bro
|
|
anyway, salamat sir. kahit maingay, ganda naman iratrat... lol 
