G R I F T E R
Private
You Wont Ever Escape My Steyr!!! Piercing You Like A Million Needles!!!
Posts: 13
|
Post by G R I F T E R on Apr 23, 2008 11:45:13 GMT 8
-First Thing to Upgrade is The Inner Barrel for Accuracy.
-A Madbull 6.03id with 509mm Stock Aug Length will do. A 550mm length will still fit for Stock Flashider of Aug though & it's still within limits of Cylinder volume.
-If a JG (Jing Gong) Aug is using type 1 Cylinder, its best to Change it to Type 0, If the Barrel is 550mm.
-Next is The Spring. A settled SP120 will land you around 420FPS, If Spring Guide w/ Bearings & Piston Head w/ Bearings are installed, slight it will laps to 420+ FPS.
-If your Aiming Strictly 420FPS or below an SP110 is Friendlier, just have your Augsmith install the Shims and 6mm Metal Bushings on your Gears well.
-If The SP110 is installed mybe your Stock Battery can still Crank This Set Up.
-If ur Using SP120 you have to use around 1600mah Battery to Crank the Set Up.
420FPS Sniper Aug Upgrades: 1.) Tight Barrel (6.03id w/ 509mm) 2.) SP120, PDI170 or SP110 (Read Above) 3.) Shims 4.) Metal Bushings (6mm) 5.) Spring Guide w/ Bearings 6.) Piston Head w/ Bearings 7.) Seal All Leaks
The Most Important in an Upgrade is the Gunsmith. Make Sure He's Familiar with The Steyr Aug.
Good Luck! :)
|
|
|
Post by punisher on May 24, 2008 7:31:10 GMT 8
hoi mackoy, mur man ka ug corek! feeling guns smith
|
|
|
Post by -=KK=- on May 24, 2008 18:48:13 GMT 8
hahaha nakabasa nko ani! be sure to qoute the author, pwede ka makasuhan ani. hahaha
|
|
G R I F T E R
Private
You Wont Ever Escape My Steyr!!! Piercing You Like A Million Needles!!!
Posts: 13
|
Post by G R I F T E R on May 29, 2008 23:59:49 GMT 8
Punisher, kita man tanan pwede ma himo na guns smith, kung kabisado lang nato ang pusil. . .
sir KK, hehehehe.... wala ko na napansin na nalimtan nako og butang sa author ani ky katulgon nako ato na time when i post that topic....XD
|
|